Dedicated Micros CAM18A, Instruction Manual

Page: 18 / 40

12
5. After aiming the camera (view direction and lens control), press
PRESET
+
95
again.
6. Then twist the
Joystick
handle or press
ZOOM IN
or
ZOOM OUT
Key to store the selected
view. The position number will be displayed and the user will be prompted to enter a preset
title.
7. Enter the title for the preset position using the
Joystick
. (Rotate handle clockwise and
counterclockwise or press
ZOOM IN
or
ZOOM OUT
Key to scroll through the alphanumeric
characters, push the handle to right or left to select next or previous digit.)
8. When you are finished entering the title, push the
Joystick
downward. Set the focus by
pushing the
Joystick
to the right or left. Set the IRIS value in the same manner as the focus.
9. Move to the DWELL setting by pushing the
Joystick
down. Twist the
Joystick
clockwise or
counterclockwise to increase or decrease dwell time of the preset position.
10. Push the
Joystick
downward then the blank preset position changes * .
11. Repeat steps 2 through 10 for each additional preset position.
To select the next page of presets, scroll the page by pushing the
Joystick
to the Left on the
first and last columns of the menu. (In
using the KBS3 keyboard with the PELCO-P protocol, you
can call the preset 1-32, 35-59.)
12. To edit the title of a stored preset, use the
Joystick
to position the cursor on the desired
preset position (
*
). Press the
PRESET
+
93
key to recall the stored preset. Twist the zoom
handle clockwise to enter the preset title field. Preset titles are useful with short cut preset
programming.
13. Select Save and Exit by pushing the Joystick to the right. Press
PRESET
+
96
to exit the
Preset menu without saving.
NOTE: Press
PRESET
+
91
at programmed position to delete a programmed preset view.
NOTE: In the normal display mode, an alternate method is to press the
PRESET
button two times
quickly in the DS2 model.
3.5 Shortcut of Preset Program
After selecting a view to be stored (direction of the camera, zoom and focus), press and hold
PRESET
until the pop-up window below displays in DS2 model.
Press number you want up to
99
.The old saved preset number is overwritten.
NOTE: Camera 10 is number 0 and you should press 0 and 1 to enter 1.
NOTE: In case of the KBS3 keyboard, you can call the preset 1-32, 35-59 and the other preset
numbers can be used in the tour, the alarm and the home function.
Save preset
Enter PRESET number
1-99