14
4. To add a stored preset as a Tour, twist the Zoom handle or press Zoom Key (Programmed
preset will scroll). To remove a stored preset from the Tour, press
PRESET
+
91
keys,
blank position mark (===) will be displayed. You can overwrite the programmed position.
5. To place functions other than preset, press Tour(
PRESET
+
70
), Pattern(
PRESET
+
80
),
or Scan(
PRESET
+
60
) for Tour, Pattern or Auto Scan respectively.
6. Repeat Step 2 through 5 for each desired position. Each title will be displayed on top of the
line.
7. Up to 36 Presets, Tours, Patterns Scans can be selected for a Tour. You can expand the
Tour sequence by calling other programmed tours. Push the
Joystick
handle to right or left
while the cursor is on the top of the line (TOUR 01) to select another page of the Tour menu.
(TOUR 01)
8. You can enter a title for the selected Tour by twisting the
Joystick
while the cursor is on
the top of the line (TOUR 01). Rotate the handle clockwise or counterclockwise to scroll
through the alphanumeric characters. Push the handle to the right or left to select the next
or previous digit.
9. Select Save and Exit by pushing the
Joystick
to the right. Press
PRESET
+
96
to exit the
program without saving.
NOTE: Press
PRESET
+
91
key at a programmed position to delete programmed function.
In the Tour mode, in conjunction with preset and Auto Scan, you can make the camera
travel from a preset position to another preset position at a specific speed.
Example
: Preset 001>002>003>004>005>006, Auto Scan 01 starts at preset 002, ends at
preset 003, Auto Scan 02 starts at preset 005, ends at preset 006; Tour01: 001, 002, A01, 004,
A02.
1
Î
2 2~3
Î
4
Î
5~6, repeat
where
Î
: Quick move, ~ : Programmed speed
3.7 Pattern
The Pattern feature records user control of the selected dome camera for up to 240 seconds. Up
to four 4 patterns can be stored and played back by pressing
PRESET
+
81 ~ 84
keys
subsequently. Alternatively, the
PATROL
+ 3 digits (001-004) can also be pressed on the
keyboard of the DS2 model.
Follow steps below to program the Pattern:
PATTERN SETUP
NO. TITLE SEC
01 : xxxxxxxxxxxxxxxx 000
02 : xxxxxxxxxxxxxxxx 041
03 : xxxxxxxxxxxxxxxx 010
04 : xxxxxxxxxxxxxxxx 020
TOTAL 071
SAVE AND EXIT(ESC TO CANCEL)
HOLD DOWN CTRL KEY
WHILE RECORDING.
