10
SPEED(MODE) :
NORMAL1~NOMAL9,SLOW VECTOR,FAST VECTOR
NORMAL1 (SLOWER)
↔
NORMAL9 ( FASTER)
SLOW VECTOR, FAST VECTOR : Move from start point to end point
including tilt and zoom simultaneously and linearly. In case of 22x model,
zoom is fixed at more wide angle and the zoom magnification information
is not displayed.
1. Press
PRESET
+
60
key to enter Auto Scan menu directly. Or press
PRESET
+
95
keys to
display the main menu on the monitor. Scroll to Auto Scan and push the
Joystick
to the right.
2. Select an Auto Scan number by pushing the
Joystick
left or right.
3. Twist the
Joystick
to enter the title by scrolling through the alphanumeric characters and
pushing the handle to the right or left to move to the next space. Press
PRESET
+
94
keys
or push the
Joystick
down to finish title mode.
4. Push the
Joystick
downward to select “Speed” and set the speed by twisting the
Joystick
clockwise or counterclockwise to select the auto scan speed.
5. When finish entering the title, select “START ANGLE” with the
Joystick
. Press
PRESET
+
95
keys, then select the start position and the zoom using the
Joystick
. Current position will
be displayed. Press
PRESET
+
95
keys to complete the selection of the start position.
6. Push the
Joystick
downward to select “END ANGLE.” Press
PRESET
+
95
keys, then move
the Joystick to select the end position and the zoom. The end position angle should be larger
than start position. Press
PRESET
+
95
key to complete the selection of the end position.
7. Select Save and Exit by pushing the
Joystick
to the right. Press
PRESET
+
96
keys
to exit
the program without saving.
NOTE: Using the Tour mode in conjunction with preset and Auto Scan, you can make the camera
travel from one preset position to another preset position at a specific speed. (Pan only)
a. Before entering the Auto Scan menu, select a preset position as a starting point for Auto Scan.
Example
:
PRESET
+
02
and do step 1 to 4. Instead of step 5, just press
PRESET
+
95
key
twice at the start angle position, the current position will be displayed as a start position.
b. Save and exit from the menu.
c. In normal mode, call a preset to be the end point of scan. Press
PRESET
+
03
then press
PRESET
+
60
keys to enter the Auto Scan menu. Move the cursor position to END ANGLE.
Just press
PRESET
+
95
key twice at the end angle position. Do steps 7.
Example
:
Preset 001>002>003>004>005>006, Auto Scan 01 starts at 002, ends at 003,
Auto Scan 02 starts at 005, ends at 006. If you set Tour 01: 001, 002, A01, 004, A02.
1
Î
2 2~3
Î
4
Î
5~6
Î
1
Î
2 2~3 ……
Where
Î
: Quick move, ~ : Programmed speed by Auto Scan.
Also you can execute Endless Auto Scan which is to turn one direction continuously by Pressing
PRESET
+
99 or AUTOPAN.
