15
1. Press
PRESET
+
95
keys to display the main menu on the monitor.
2. Scroll down to PATTERN and push the
Joystick
to the right. Or simply press the
PRESET
+
80
key rather than use the Main Menu.
3. Select the empty Pattern number to be programmed by pushing the
Joystick
Up or Down.
If last column is not 000, a pattern has already been recorded. Patterns can be over written.
4. Press the
PRESET
+
95
keys and control the camera direction and zoom with the
Joystick
.
Your controls will be automatically recorded until you press the
PRESET
+
95
keys again.
You can repeat this procedure until you have the pattern you want. Previously recorded
patterns will be overwritten each time you do this.
5. Scroll down to the Save and Exit option and push the
Joystick
to the right to save and exit.
6. You can title the selected Pattern by twisting the
Joystick
. Rotate the handle clockwise or
counterclockwise to scroll through the alphanumeric characters, push the handle to right or
left to select next or previous space.
7. Pressing
PRESET
+
96
will not save your information and exits to the previous mode.
Press the
PRESET
+
91
key at any programmed position to delete that programmed
pattern.
NOTE: If total recording time reaches 240 seconds, it will automatically stop for a moment and
restart recording. Previous data will be overwritten.
3.8 Alarm
NO : Alarm input number
PRIO : Lower No. has higher priority, Equal priority alarms will be serviced repeatedly.
PRS : Stored preset number to be called by alarm.
IN
: NO/NC - normally open /Closed OFF - ignore
OUT : OUT1~OUT4 - Relay out 1,2,3,4, OFF - No output.
HOLD : Alarm will be held for programmed time (03 to 99 seconds)
LATCH : ON - Shows all alarms including past alarm, OFF - Shows activated alarms only.
There are 8 levels of priority. “0” is the highest priority and can be selected Autoscan, Pattern or
Tour only. “1” - “8” can be selected Preset only. During responding “0” priority alarm, other
alarms won’t be serviced until the “0” priority action is completed.
ALARM SETUP
NO PRI PRS IN OUT HLD LATCH
01 1 001 OFF OFF 3 OFF
02 0 A01 OFF OUT1 3 OFF
03 1 240 NO OUT1 3 OFF
04 2 001 NC OUT4 3 OFF
05 1 001 OFF OFF 3 OFF
06 8 001 OFF OUT1 3 OFF
07 1 240 NO OUT1 3 OFF
08 2 001 NC OUT4 3 OFF
SAVE AND EXIT(ESC TO CANCEL)
