USE R M ANU AL
TOUCHSCREEN 2.1
6
SEPTTEMBER 12, 2017
Using Port C on JCOM
Since port C is shared by header JCOM and RJ-45 socket, JCOM header could
be used for communication only if RJ-45 is not in use.
As for header J8, use either a premade Ethernet cable and cut one end or build
your own cable using T568-A for the display plug.
JCOM is wired as follows:
Pin 4
–
Solid and striped brown wire
Pin 5
–
Solid and striped blue wire
Pin 6
–
Striped green wire
Pin 7
–
Solid green wire
Attaching a RJ-45 Using the T569-A Wiring Standard
When attaching a RJ-45 connector to the end of a CAT5 or CAT6 cable, use the
T568-A wiring standard. This applies to both ends if you plan to use the RJ-45
socket on a Supervisaire control board.
With the connectors on the plug facing towards
you (see Figure 2), the order of the wires from
left to right are:
•
Striped Green
•
Solid Green
•
Striped Orange
•
Solid Blue
•
Striped Blue
•
Solid Orange
•
Striped Brown
•
Solid Brown
Figure 2. RJ-45 Connector
