USE R M ANU AL
TOUCHSCREEN 2.1
20
SEPTTEMBER 12, 2017
Again, note that Service mode menu (as well as each service mode control page
content) is also depends on the
system’s
configuration, e.g. Compr 2 button is
not shown on Figure 13, since system is configured for one compressor only.
,
Figure 14. Adjusting Analog Output signal in Service mode
Service Mode
–
Commissioning.
Advanced settings in Service mode, in addition to ones, listed in Normal mode,
would also include Service button. It allows for access to following features:
•
Commission
–
allows to commission/de-commission the system.
o
Systems, delivered from Dectron Company are set to be Non-
commissioned (decommissioned)
–
this ensures that system
would not convert to Normal mode after restart or power up
without being commissioned by start up agent. Once system
is successfully started up, it must be Commissioned to allow
for Normal Mode operation.
o
Commission feature also displays Tested feature;
it’s
used at
the factory testing facility and is not revertible, once set to yes.
•
Core Config
–
allows to adjust system serial number (rarely used) and
control board version (in case of board replacement with one of different
version)
