USE R M ANU AL
TOUCHSCREEN 2.1
14
SEPTTEMBER 12, 2017
The Advanced page consists of two button groups, arranged into three columns
(see below):
Figure 9. Advanced page
The first two columns (left and center, dark-blue buttons) show
Factory
Settings
menus (same as displayed in WebSentry®). These settings would
define system operation and would include following:
Environment
Dehumidification, heating, cooling, and pool heating
controls settings (space heater type, deadbands, space
heating/cooling control type etc.)
Ventilation
Ventilation control settings
(blowers’
speeds, economizer
and purge parameters, timers etc.)
Compressors
Compressors control settings (number of compressors,
refrigerant type, alarm and operational pressure and
temperatures levels, timers, other operational settings)
Sensors
Sensors parameters (calibration, type, usage etc.)
Controls
Inputs/outputs configuration (limits, polarity, availability)
I/O Assignments
Sensors and Inputs/Outputs control board assignment
Network
Communication settings (TCP/IP, BACnet, other com
protocol configurations, serial ports settings etc.)
TouchScreen
Touch display settings (temperature
degrees’
type
preference, date and time format, display password etc.).
Settings are stored only on the SD card and are unique
for each display.
