background image

01

IMPORTANT SAFEGUARDS

Before using the electrical appliance, the following basic precautions should always be followed including the following:

 Read all instructions, and save it for future reference.

 Before using, check that the voltage of wall outlet corresponds to that shown on the rating plate.

 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any 

manner. Bring it to a qualified technician for examination, repair or electrical or mechanical adjustment.

 Do not let cord hang over edge of table or counter.

 To protect against risk of electrical shock, do not put the motor base into water or other liquid. To disconnect, turn any control to 

“off”, then remove plug from wall outlet by grasping the plug, not the cord.

 Close supervision is necessary when any appliance is used by or near children.

 Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or 

damage to the Food Processor. A scraper or spatula may be used, but must be used only when the Food Processor is not running.

  Avoid contacting moving parts.

 Never feed food by hand. Always use food pusher.

 Before removing the lid from the jar from the power unit, switch off the unit, wait until the blades have come to a complete stop.

 Do not use fingers to scrape food away from discharge disc while appliance is operating. Cut type injury may result. 

 Be certain lid is securely locked into place before operating appliance.

 Be sure to switch off the appliance after each use of your food processor. Make sure the motor stops completely before 

disassembling. 

 Do not put your fingers or other objects into the unit opening while it is in operation. If food becomes lodged in opening, use food 

pusher or another piece of fruit or vegetable to push it down. When this method is not possible, turn the motor off and disassemble 

to remove the remaining food.

 Do not attempt to defeat the cover interlock mechanism.

Summary of Contents for KUMG003B













Reviews: