04
BLENDING
1. Place the blending jar on the Motor Unit from the unlock
position and slightly turn the jar clockwise until the blending jar
locks into the lock position on the motor base. If the blending
jar is not or is badly positioned, the blender will not work.
2. Peeled or cored the fruit or vegetables and then cut it into
small dices, put the food piece into the jar. Usually certain
amount of purified water has to be added to facilitate the
smooth running of appliance. The amount of mixture should
not exceed the max level as indicated on the blending jar.
Note: never use boiling liquids or run the appliance empty.
And the blending jar can not be used for blending meat.
3. Replace the Jar Cover on the jar and ensure that the Jar Cover
can fix with the jar securely.
4. You may add ingredient into the jar through the center
opening of Jar Cover during operation, then replace Measuring
Cup if necessary. Let the tabs of Measuring Cup align with the
grooves of Top Cover, put down and turn in clockwise by 90°to
lock it in place, when disassembling, turn the measuring cup in
anti-clockwise by 90°to unlock it.
5. Connect the plug to wall outlet and set Speed Selector to your
desired speed. There are four setting: P, 0, 1, 2. The 1 setting is
the low speed, the 2 setting is the high speed. Turn the selector
to P position and hold it to pulse actuate motor for
delicate chopping. Release it to return the 0 position. The Pulse
mode allows you to create a burst of power for quick, efficient
blending.
Note: The total operating time should not more than 3
minutes.
6. Turn the Speed Selector to 0 Position once the mixture has
been blended to your desired consistency.
7. Remove the blending jar from the Motor Unit (turning the jar
anti-clockwise), carefully take down the Jar Cover, then pour
and serve.
8. The proportion of the Carrots and water is 3:2. Make sure
the quantity of the water shall not be more than the maximum
specified water quantity.