05
05
CLEANING
1. Disconnect the power supply before cleaning.
2. Pour a little warm water into the jar, turn and hold the speed
selector to P position for a few seconds.
3. Remove the jar and rinse and rinse under running water.
Remove Jar cover and measuring cup, then immerse the top
cover, measuring cup in water and clean them with a soft brush,
finally clean them with dump cloth.
Caution: the blade base can be disassembled for cleaning.
4. Wipe the outside of base with a damp cloth. Never immerse
it in water as electric shock is possible to occur. Then dry
thoroughly. Ensure the interlock area is free of food particles.
CHOPPING
1. Firstly assemble the driving shaft into the motor base, make
sure it is clipped into position.
2. Place the chopping jar on the Motor Unit from the unlock
position and slightly turn the chopping jar clockwise until the
chopping jar locks into the lock position on the motor base.
Make sure it is assembled in place correctly, otherwise the
appliance will not operate.
3. Insert the “S” blade into the driving shaft in the chopping jar
securely. Make sure it is locked into position.