background image

02

 The metal blades and disk is extremely sharp, handle with care. Always hold the blade assembly by the finger grip or stem, away 

from the cutting edge, both when handling and cleaning.

 To reduce the risk of injury, never place processing blade or circle blade ass’y on drive shaft without the processing jar locked 

properly in place.

 Do not leave this appliance unattended during use.

 If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water! Do not use 

this appliance after it has fallen into or becomes immersed in water. 

 To reduce the risk of injury to persons or property, never use this appliance in an unstable position.

 Do not use this appliance for other than its intended use.

 The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.

 Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.

 Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

 Do not use outdoors.

 Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

   or similarly qualified persons in order to avoid a hazard.

 

Caution: never immerse in water, unplug before inserting or removing parts.

 

Caution: do not open lid until blades stop.

 Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if 

they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards 

involved. Children shall not play with the appliance.

 This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

 Do not fill the bowl above the marked maximum fill line (or rated capacity) to avoid risk of injury due to damage to the cover or 

bowl.

 Save these instructions.

Summary of Contents for KUMG003B













Reviews: