MPS-2 & MPS-6
1
INTRODUCTION
Connector Types: 3.5 mm (stereo) plug or stripped & tinned lead
wires (3)
Cable Length: 5 m standard; custom lengths available upon request
Data Logger Compatibility (not exclusive):
Decagon
: Em50, Em50R, Em50G (rev 2.13+)
Campbell Scientific
: Any logger with serial I/O including
CR10X, CR23X, any CRBasic type logger (CR850, 1000,
3000, etc.)
Other
: Any data acquisition system capable of 3.6 to 15 V
excitation and serial or SDI-12 communication
Handheld Reader Compatability: ProCheck (rev 1.53+)
Software Compatibility: ECH2O Utility (rev 1.71+) and DataTrac
3 (rev 3.9+)
1.3
Warranty Information
The Dielectric Water Potential Sensor has a 30-day satisfaction guar-
antee and a one-year warranty.
1.4
Seller’s Liability
Seller warrants new equipment of its own manufacture against defec-
tive workmanship and materials for a period of one year from date
of receipt of equipment (the results of ordinary wear and tear, ne-
glect, misuse, accident and excessive deterioration due to corrosion
from any cause are not to be considered a defect); but Seller’s lia-
bility for defective parts shall in no event exceed the furnishing of
replacement parts F.O.B. the factory where originally manufactured.
Material and equipment covered hereby which is not manufactured
by Seller shall be covered only by the warranty of its manufacturer.
Seller shall not be liable to Buyer for loss, damage or injuries to per-
sons (including death), or to property or things of whatsoever kind
(including, but not without limitation, loss of anticipated profits),
3
