5
CONNECTING TO A LOGGER
MPS-2 & MPS-6
DataTrac 3 version 3.9 or greater
Em50 version 2.13 or greater
ProCheck readers version 1.53 or greater
Use ECH2O Utility or DataTrac 3 to download data from a Decagon
logger to your computer.
Figure 5: 3.5 mm Stereo Plug Wiring
5.2
Connecting to a Non-Decagon Logger
You may purchase the MPS-2 and MPS-6 sensors for use with non-
Decagon data loggers. These sensors typically come pre-configured
with stripped and tinned (pigtail) lead wires for use with screw termi-
nals. Refer to your distinct logger manual for details on wiring. See
Section 5.3 for more information on connecting the MPS-2 and MPS-
6 sensors to non-Decagon loggers or visit
http://www.decagon.com/su
pport/mps-2-and-mps-6-integrator-s-guide/
for the complete Integra-
tor’s guide.
Figure 6: Pigtail End Wiring
Connect the wires to the data logger as shown, with the supply wire
(white) connected to the excitation, the digital out wire (red) to a
digital input, the bare ground wire to ground as illustrated below.
16
