Installing a BA42 Storage Expander Upgrade
2.3 Installing an RF3x-EK Hard Disk Drive
2.3.6 Install the Drive in the Expander Box
Tilt the drive until you can place the shock isolator rubber feet on the bottom
of the drive into the four keyhole-shaped openings in the floor of the box. See
Figure 2–11.
Figure 2–11 Inserting an RF3x-EK Hard Disk Drive in the Expander Box
MLO-010046
1
Shock isolator rubber foot
Slide the drive toward the small end of the keyhole-shaped openings so that
the slots on the shock isolator rubber feet engage the hole, and the metal
spring tab on the expander box floor fits into the appropriate slot on the drive
bracket (see Figure 2–12).
Note
Support is required if the expander box is to be shipped or moved; in
that case, insert a rubber drive shipping bracket support (shown in
Figure 2–12) into the metal retaining slot for each drive.
Installing a BA42 Storage Expander Upgrade 2–13
