Installing a BA42 Storage Expander Upgrade
2.3 Installing an RF3x-EK Hard Disk Drive
2.3.4 Connect the 5-Pin Power Cable
Connect the appropriate 5-pin power connector to the drive. The keyed tab
on top of the connector slides into the corresponding slot on the drive, as
shown in Figure 2–6. The drive must only be attached to the power cable with
the appropriate connector for that drive (see Figure 2–7 and Figure 2–8 to
determine which connector to use for each drive).
The connections to the Remote Front Panel (RFP) detailed in Figure 2–7
and Figure 2–8 will already be in place; they are included here as an aid in
troubleshooting.
Figure 2–6 Connecting the 5-Pin Power Cable
MLO-010036
1
Power cable
2–8 Installing a BA42 Storage Expander Upgrade
