Installing the BA42 DSSI Storage Expander
1.4 Setting DSSI ID Switches for Hard Disk Drives
1.4 Setting DSSI ID Switches for Hard Disk Drives
The DSSI ID switch for hard disk drives installed in a BA42 expander is
located on the back of the expander.
If there are one to four hard disk drives preinstalled in your expander,
check the DSSI ID switch setting for the first drive and change the setting
if necessary. Settings for the remaining hard disks are then automatically
incremented.
1.4.1 Remove the DSSI ID Switch Cover from the Expander
Access the DSSI ID switches by lifting up and removing the switch cover (see
Figure 1–3). Replace the switch cover after checking the switches or the drive
indicator LEDs.
Installing the BA42 DSSI Storage Expander 1–5
