Installing the BA42 DSSI Storage Expander
1.4 Setting DSSI ID Switches for Hard Disk Drives
Figure 1–3 Removing the DSSI ID Switch Cover from the Expander
MLO-010020
1.4.2 Check the DSSI ID Switch Setting on the Expander
If there is a hard disk drive installed in the expander, the three DSSI ID
switches on the back of the box determine the DSSI ID switch setting for the
first drive (see Figure 1–4).
The DSSI IDs for additional hard drives are automatically incremented by one
as they are added; no further action is necessary.
1–6 Installing the BA42 DSSI Storage Expander
