A-10
Plug is in the bottom of
the filter pan or in the line
from the filter to the pump.
Disconnect the tubing from
the filter pan to the motor.
Make sure the pipe is cool.
Try blowing air
through it.
Can you
blow air through
it?
This line is clogged.
Soak the line in hot
water until you can
blow through it.
The line is clear.
Reconnect hose
to the pump inlet.
Does oil
flow?
Conduct
normal filter
operations.
There may be a plug
in the bottom of the
filter pan.
Take filter pack apart, then
scrub the bottom of the pan
and clean the intake pipe to
remove residual shortening.
Reassemble the filter
pack. Then turn pump
motor "ON".
Does oil flow?
Conduct normal filter
operations.
Go to page A-9 and
follow Pump
troubleshooting
procedures.
No
Yes
Yes
No
Yes
No
ENTER FROM PAGE A-7 OR A-8
HERE