HUMMER H1: STEP BY STEP
7
11
22
33
44
11
22
33
55
Hold the air filter cover so that the cross is facing you, and hold
the air filter with its bottom side toward you.
Insert the air filter into the cover, as shown, but do not apply
any adhesive.
The air filter assembly fits into the hole next to the gasket.
With a pair of scissors or a knife, cut
sticker number 8 from the sticker sheet.
This sticker will be applied to the hubcap,
so be sure to cut around it in a circle.
With tweezers, peel the sticker off the
backing and apply it to the center of
the hubcap.
Make sure the
two depressions
on the hubcap
(circled)
are aligned
horizontally with the lettering 'CTIS' on
the sticker.
Carefully push the air filter into place, and secure it temporarily
with masking tape.
Installing the air filter
Applying the stickers
Top
Bottom
Before proceeding with the assembly, be sure to identify
the two sides of the air filter correctly, as shown here.
Assembled parts
