background image

     

 

  2 / 17 

 

WWW.DDTOP.COM 

PREFACE 

Thank you for choosing the products of Dandong Top Electronics Instrument (Group)-Co.,Ltd. 

This operation manual provides you with important information on installation, connection and 

commissioning as well as on maintenance, troubleshooting and storage. 

 

Please read it carefully before installation and commissioning and keep it as part of the product 

near the meter for easy reading. 

 

This manual can be downloaded by entering the version number at www.ddtop.com. 

If the instructions are not followed, the protection provided by the meter may be destroyed. 

 

Trademark, Copyright and Restriction Instructions 

Dandong Top Electronics Instrument (Group) Co.,Ltd.®, Dandong Top Pump Co.,Ltd.®,   

DDTOP® are registered trademarks of the company. 

 

The performance specifications of the meter are effective as of the date of publication and are 

subject to change without notice. Dandong Top Electronics Instrument (Group)Co.,Ltd. reserves the 

right to modify the products described in this manual at any time without prior notice. 

 

Quality Assurance 

Dandong Top Electronics Instrument (Group) Co.,Ltd. guarantees that all variable area flow meters 

have no defects in materials and manufacturing processes within one year from the date of delivery. 

During the warranty period, if the product returns with quality problems and the claim is 

determined by the manufacturer to be within the scope of warranty, Dandong Top Electronics 

Instrument (Group) Co.,Ltd. is responsible for repair or replacement of the buyer (or owner) free of 

charge. Dandong Top Electronics Instrument (Group) Co.,Ltd. is not responsible for the costs caused 

by improper use of equipment, labor claims, direct or subsequent damage and installation and use 

of equipment. In addition to the special written warranty certificate for certain products of Dandong 

Top Electronics Instrument (Group) Co.,Ltd., Dandong Top Electronics 

 

Summary of Contents for UHC Magnetic Level Gauge


















Reviews: