![background image](http://html1.mh-extra.com/html/ddtop/uhc-magnetic-level-gauge/uhc-magnetic-level-gauge_operating-manual_2460708010.webp)
10 / 17
WWW.DDTOP.COM
7.
Configuration
7.1
Transmitter Configuration
This section mainly introduces how to use the 3 local keys (Enter key←┘), (up key "↑"), (down key
"↓"), combined with LCD display to configure internal parameters.
7.1.1 LCD display function overview
See (Figure 7-1) for full screen information. The variables that can be displayed on the LCD screen
include current (Figure 7-2), percentage (Figure 7-3) and main variable (Figure 7-4). You can set to
display a single variable, or you can set the percentage and the main variable to cycle display, and
the effective digits of the decimal part can be set (0, 1, 2, 3, 4 decimal places). The display mode is
set by 475 configuration software or button. If the percentage and main variable are set to be
displayed cyclically, the LCD will display these two variables alternately with a period of 3 seconds.
Figure 7-1 Full LCD display Figure 7-2 Current display
Figure 7-3 Percentage display Figure 7-4 Main variable display
7.1.2 LCD Display Symbol Description
① If it is in HART communication status, the symbol
on the right corner of the LCD
screen will flash.
Summary of Contents for UHC Magnetic Level Gauge
Page 17: ...17 17 WWW DDTOP COM...