![background image](http://html1.mh-extra.com/html/ddtop/uhc-magnetic-level-gauge/uhc-magnetic-level-gauge_operating-manual_2460708016.webp)
16 / 17
WWW.DDTOP.COM
8.4
The remote transmission device is not suitable to work in a strong magnetic field other than
the magnetic field of the magnetic float;
8.5
After configuration, tighten the display and power cover to prevent the meter from getting
wet.
9.
Fault Analysis and Troubleshooting
10.
Disassemble
10.1
Warning
Before disassembling, pay attention to dangerous process conditions, such as pressure, high
temperature, corrosive or toxic media in the container, etc.
Please refer to the instructions in the chapter 6.2 Installation Operation Process and 7.1 Electrical
Wiring, and remove the components in the reverse order of the operation steps.
10.2
Waste Removal
Please follow the current regulations in each region for waste disposal.
11.
Product Certification
Failure Phenomenon
Cause Analysis
Troubleshooting method
The remote
transmission device
has no signal output or
inaccurate output
1. The remote transmission device has no
power signal input
2. The components in the remote
transmission device circuit detection board
are damaged
1. Turn on the power
2. Replace the circuit
detection board
Summary of Contents for UHC Magnetic Level Gauge
Page 17: ...17 17 WWW DDTOP COM...