DDK HFC3000II, Instruction Manual

Page: 71 / 216

Chapter 6 Description of Operations
PAGE 6-3
(2) Indication LEDs
①
OK LED Green [QL OK]
This lights up when the fastening ends with all results being within the various setting ranges.
When the TOTAL OK LED lights up, this LED is OFF.
②
NG LED Red [NG]
This lights up when the fastening ends with a result falling outside any of the various setting ranges.
This lights up when a system error occurs (The abnormality No. is indicated on data indication part).
③
TOTAL OK LED Green [TOTAL OK]
This lights up when the results of the fastening operations of the designated number of times (cycle
count) are all OK.
④
Torque LED Green [TORQUE]
This lights up when the DATA content is a torque value.
⑤
Angle LED Green [ANGLE]
This lights up when the DATA content is an angle value.
(3) Switches for Data Indication Operations
①
SET key
This is used to finalize an indication or finalize data.
②
Cursor keys [
▲
][
▼
]
These are used to scroll the indicated data and to change setting data.
These are used to change WORK No. in the operation view mode.
However, these functions cannot be used while an abnormality is occurring.
③
Cursor keys [
◄][►]
These are used to change the mode and to move the cursor (flashing indication position).
S0140185-H