DDK HFC3000II, Instruction Manual

Page: 119 / 216

Chapter 6 Description of Operations
PAGE 6-51
SYS.300 CC-Link DeviceNet
PROFIBUS
DP-V1
PROFINET
IO
EtherNet/IP
SYS.303
○ ○ ○
- -
SYS.304
○ ○
- - -
SYS.305
○
- - - -
SYS.306
○
- - - -
SYS.307
○ ○ ○ ○ ○
SYS.308
○ ○ ○ ○ ○
SYS.309
○ ○ ○ ○ ○
SYS.310
○ ○ ○ ○ ○
SYS.311
○ ○
○ ○ ○
SYS.312 - - -
○ ○
SYS.313
- - -
○ ○
SYS.314 - - -
○ ○
SYS.315
- - -
○ ○
SYS.316 - - -
○ ○
SYS.317 - - -
○ ○
SYS.303 Station No. (Node Address) (CC-Link, DeviceNet, PROFIBUSDP-V1)
The station No. (node address) of the fieldbus set in the Unit is indicated.
Fieldbus Type
CC-Link DeviceNet PROFIBUSDP-V1
1
～
64 0
～
63 0
～
125
SYS.304 Communication Speed Setting range: 0 ~ 4 (CC-Link, DeviceNet)
The communication speed of the fieldbus set in the Unit is indicated.
Fieldbus Type
System Parameter D-No.304
0 1 2 3 4
CC-Link 156kbps 625kbps 2.5Mbps 5Mbps 10Mbps
DeviceNet
125kbps 250kbps 500kbps - -
SYS.305 Occupied Stations Setting range: 1 ~ 4 (CC-Link)
The number of occupied stations of the fieldbus set in the Unit is indicated.
SYS.306 Extended Cyclic Setting Setting range: 1, 2, 4, 8 (CC-Link)
The extended cyclic setting of the fieldbus set in the Unit is indicated.
SYS.307 I/O Setting Byte Length
“PLC
￫
Master Spindle
” [byte]
(besides standard IO)
The I/O setting byte length for “PLC
￫
MASTER Spindle
” of the fieldbus set in the Unit is indicated.
SYS.308 I/O Setting Byte Length
“Master Spindle ￫ PLC” [byte]
(besides standard IO)
The I/O setting byte length for “MASTER Spindle ￫ PLC” of the fieldbus set in the Unit is indicated.
S0140185-H