DDK HFC3000II, Instruction Manual

Page: 31 / 216

Chapter 3 Part Names
PAGE 3-3
3-1-2. Bottom Panel
Do not change the bottom rotary switch (AXIS ADDRESS) from the setting of "× 10" to
"0" and "× 1" to "1".
T/A MON.
Connector for torque and angle
monitor output connection.
(PAGE 4-18)
RS232C-1
Connector for output of fastening
result data.
Can be connected to a PLC, printer,
PC, etc. (PAGE 4-19).
100~240V AC
Primary power source input
connector
Operates on a single-phase
50/60Hz power source.
Provide secure grounding.
TB1,2,3
Connector for input/output
connection.
Refer to separate section for signal
details and precautions (PAGE 4-6).
Electric leakage breaker
When an electric leakage
occurs in the Unit, cable, or
tool, this breaker trip
instantaneously to secure
safety from the electric
leakage.
I…ON
O…OFF
TOOL
Connector for tool cable
connection.
Twist lock type connector.
Can be connected and
disconnected by twisting by 90
degrees.
Various FIELDBUS ports(Option)
The communication specification can
be selected from among DeviceNet,
PROFIBUS, CC-Link, etc., in
accordance with the user specifications
(PAGE 9-1~).
RS232C-2(Option)
For ID data input
CF Card(Option)
Stores fastening result data
and curve data.
ETHERNET(Option)
For Data Report
ETHERNET
For PC Coummunication
Caution
S0140185-H