H A R D W A R E I N S T A L L A T I O N
Data Device Corporation
FC-76000 Manual
www.ddc-web.com
Rev A-01/10-0
12
3.2.5 LC Fibre Optic Connectors
The front view of the LC connectors is shown in Figure 4. The orientation shown is
with the switch vertically mounted, front panel text right-side up, which means the LC
connector latches are on the right side of the connector. Note that the TX port is “out”
(photo emitter) from the switch and the Rx port is “into” (photo detector) the switch.
Figure 4. LC Connector (front view)
3.2.6 Rear-Panel Pinout
The VME64X P1 and P2 connectors on the switch are used only for power (5V, 3.3V)
and ground.
Table 6. VME64X P1/P2 pinout
Voltage/Gnd
P1
P2
5V
A32, B32, C32,
B1, B13, B32
3.3V
D12, D14, D16, D18, D20, D22, D24,
D26, D28, D30
GND
A9, A11, A15, A17, A19,
B20, B23,
C9,
D2, D31,
Z2, Z4, Z6, Z8, Z10, Z12, Z14, Z16,
Z18, Z20, Z22, Z24, Z26, Z28, Z30, Z32
B2, B12, B22, B31, D31,
Z2, Z4, Z6, Z8, Z10, Z12, Z14, Z16,
Z18, Z20, Z22, Z24, Z26, Z28, Z30,
Z32
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com