DDC FibreMATRIX FC-76000 Series, Manual, Page: 17 / 60

O V E R V I E W
Data Device Corporation FC-76000 Manual
www.ddc-web.com Rev A-01/10-0
7
Table 2. FC-76000 Specification Table
PARAMETER MIN TYP MAX UNITS
ENVIRONMENTAL CHARACTERISTICS
(as per ANSI/VITA 47-2005) (cont’d.)
C-76161V2-300 (Forced Air Cooling) (cont
‟
d.)
Vibration Class: V1 5 Hz to 100 Hz (PSD) = 0.04 g²/Hz, 1 hr
per axis
Hz
Humidity 95% relative humidity for five 48 hr cycles
C-76161V2-200 (Forced Air Cooling)
VITA 47 Environmental Class EAC6
Operating Temp (inlet air): AC3 -40 - +70 °C
Minimum Required Air Volume Flow Rate (sea
level) at maximum inlet temperature 25 CFM
Non-Operating Temp: C3 -50 - +100 °C
Temperature Cycling: C3 -50 - +100, 500 cycles °C
Vibration Class: V2 5 Hz to 100 Hz PSD increasing at 3
dB/octave, 1 hr per axis
100 Hz to 1000 Hz PSD = 0.04 g 2 /Hz, 1 hr
per axis
1000 Hz to 2000 Hz PSD decreasing at 6
dB/octave, 1 hr per axis
Hz
Hz
Hz
Humidity 95% relative humidity for five 48 hour
cycles
Shock Class 20g, 11 millisecond, half-sine shock
pulses in all three axes
g/ms
C-76161V2-C00 (Conduction Cooling)
VITA 47 Environmental Class ECC3
Operating Temp (alloable edge temp): CC3 -40 - +70 °C
Non-Operating Temp: C3 -50 - +100 °C
Temperature Cycling: C3 -50 - +100, 500 cycles °C
Vibration Class: V3 5 Hz to 100 Hz PSD increasing at 3
dB/octave, 1 hr per axis
100 Hz to 1000 Hz PSD = 0.1 g 2 /Hz, 1 hr
per axis
1000 Hz to 2000 Hz PSD decreasing at 6
dB/octave, 1 hr per axis
Hz
Hz
Hz
Humidity 95% relative humidity for five 48 hour
cycles
Shock Class 40g, 11 millisecond, half-sine shock
pulses, all three axes
g/ms
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com