DaytonAudio PPA800DSP, User Manual

Page: 6 / 23

6
Operation
1. Ensure that all your equipment is OFF, and lower all volume, gain, and level controls before
making connections.
2.
You may connect a dynamic microphone, or line level audio device (mixing console, CD
player, electronic keyboard, etc.) to each of the INPUT 1 and INPUT 2 jacks, using the
appropriate cables.
3. Link additional powered speakers or outboard gear with the OUTPUT jack.
4.
Turn on your mixer or other audio devices, then turn on this amplifier.
5.
Adjust levels of INPUT 1 and INPUT 2 (and OUTPUT selector, if applicable) to suit your needs.
Use the volume control on your Bluetooth device to control the level of Bluetooth playback.
Specifications
● Amplifier type: ...........................Class D
● Low frequency power rating: ..... 600W RMS (4 ohms/1 kHz @ THD+N 1%)
● High frequency power rating: .... 200W RMS (4 ohms/8 kHz @ THD+N 0.1%)
● Input sensitivity: .........................LINE, 0 dBu; MIC, -24 dBu
● Bluetooth version: .....................4.2
● Power: .......................................120~240 VAC, 50/60 Hz, auto-sensing
● Dimensions: ..............................15" L x 6-5/16" W x 2-3/4" D
● Cutout dimensions: ...................14" x 5-1/2" • Weight: 5.0 lbs.