5
Control Panel (I/O) Definition
1.
Power Indicator:
Illuminates
when the unit is powered on.
2.
Signal Indicator:
Illuminates
when signal is present
3.
Limiter Indicator:
Illuminates
just prior to the amp clipping
and distorting. Adjust input
levels so that this LED
illuminates only briefly, if at
all, during the loudest peaks
in your program material.
Operating the system with this
indicator on frequently or all
the time will result in degraded
sound quality and could
damage and/or significantly
reduce the service life of the
components.
4.
Bluetooth Pairing Button:
Press this button to pair your
mobile device. Once paired,
press again to play. Press and
hold for 2-3 seconds to cancel
pairing. STATUS indicator will
flash rapidly when pairing, illuminate solid when paired, and flash slowly when playing.
5.
Volume Control for INPUT 1
6.
MIC/LINE Switch for INPUT 1:
Engage when using a microphone; disengage when using a
line level source such as a mixing console or other audio device.
7.
Combination Jack for INPUT 1:
Balanced or unbalanced XLR or 1/4" connector.
8.
Volume Control for INPUT 2
9.
MIC/LINE Switch for INPUT 2:
Engage when using a microphone; disengage when using a
line level source such as a mixing console or other audio device.
10.
Combination Jack for INPUT 2:
Balanced or unbalanced XLR or 1/4" connector.
11.
MIX/IN2 Selector Switch:
Engage to send your mixed signal (1&2) to another powered
speaker, powered subwoofer, or other device. Disengage to send only the signal from INPUT 2.
12.
OUTPUT Jack:
XLR connector, line level output.
13.
USB B I/O Port:
Connect to Windows computer for customizing and adjusting DSP settings .
14.
DSP MODE Selector:
Press this button to cycle through the DSP equalizer presets. The
adjacent LED indicators will illuminate to indicate which preset is selected as the button is
pressed. DSP presets are customizable through the PC software, the presets are programed
from the factory with the following curves.
15.
Main Power Switch
16.
IEC Power Jack:
Use included AC power cable.
Summary of Contents for PPA800DSP
