17
Using Bluetooth as an Input Method
The PPA800DSP features simple to use bluetooth input.
1.
To enable bluetooth, hold the “Pair” button (circled below) next to the Bluetooth symbol until
you see the blue LED light up and flash next to it. If speakers are connected to the outputs,
you will hear a beep when it is ready to pair. If it is already paired, it will try to connect.
2.
Look for the device name as “BLUETOOTH” and pair as you would any other device. The
LED will blink blue while it is trying to pair and become solid blue when it is connected.
3.
Bluetooth input can be turned off by holding down the bluetooth button again until the blue
LED goes dark.
Notes
● Bluetooth must be re-enabled by holding down the Bluetooth button every time the DSP pow
-
ers on.
●
The Bluetooth signal will mix with inputs from 1 and 2. If other inputs are connected and only
Bluetooth is desired, the input volumes must be turned down.
●
Volume must be controlled from the host device or the Windows software when using Blue-
tooth as the input method.
Summary of Contents for PPA800DSP
