12
Software - Filter Controls
A.
Graph:
The graph shows a visual representation of the applied filters. When enabled, the
LPF or HPF frequency can be changed by sliding the blue circles labeled L or H in the graph.
B.
LOW PASS or HIGH PASS Selection:
Click the LOW PASS button to edit the low pass
output (red wires) settings, or the HIGH PASS button to edit the high pass output (blue wires)
settings.
C.
LPF and HPF:
To enable or disable the low/high pass filter, click either the “LPF ON/OFF” or
the “HPF ON/OFF” button. The label of the button will say either ON or OFF to represent the
current state of the filter.
i
.
Slope:
Change the slope of the filter by picking one of the many options in the slope drop
down box. This selection will be immediately represented in the graph to the left.
ii.
Frequency:
To change the frequency of the filter, a value can be entered in the box, the
arrow buttons can be used to move the value up or down, the slider can be moved back
and forth, or the circular L or H button in the graph can be moved with a click and drag.
Notes
● The HIGH PASS output has a passive 1 kHz high pass filter. Even if you turn HPF off in this
menu, the signal is filtered out below 1 kHz. The LOW PASS output can output full-range.
●
Filters are not affected by changing presets. Filters will never be changed by pressing the
“DSP MODE” button on the amp.
●
Summary of Contents for PPA800DSP
