Ver 2.0 and up
iBoot
Page 9
3. Setting the IP address using the ibootrst.exe
Dataprobe provides an iBoot Reset Program; ibootrst.exe to easily reset the
IP address, as well as set the factory defaults in the event the security code
is lost. Obtain ibootrst.exe from Dataprobe’s web site.
All iBoot tools are available at: www.dataprobe.com/power/iboottools.html
To use ibootrst.exe, the computer running the program must be on the same
subnet and network segment as the iBoot is to be programmed to. Same
subnet can be directly connected or connected through Ethernet hubs. (NOT
routers or switches)
To use ibootrst.exe
Enter the MAC address found on the
underside of the iBoot and the desired
IP
address. Click on the Set IP Address
bar.
ibootrst.exe will confirm the proper
setting
of the address. If you receive an error
message, check the MAC and IP
addresses.