Ver 2.0 and up
iBoot
Page 12
To control the power, click on the appropriate button. During power cycling,
the Power Status bar will indicate the temporary status, with a blue
background. Once the cycle is complete, the status bar will revert to its
original condition. To abort a power cycle, click on either Power On or Power
Off buttons. iBoot will assume the status selected.
If the Auto-Ping or Heartbeat Features are in
use then the page will also display the
current status, OK or Triggered, for each,
with a counter of how many times that
feature was triggered. If connecting with the
Setup Password, a reset button for the
counter is provided. These features are described in greater detail in the
Advanced Operation section on page 16
Use the Refresh link to obtain the latest status of iBoot. Using your
browser's refresh button can lead to inadvertent power switching.
To access the Setup page, the Setup Password must be used for the initial
login. The factory default for the Setup Password, as well as the operation
password is
PASS
. Both passwords can be changed in Setup.
When you are finished
with
iBoot, click on Logout. A
confirmation page will be
displayed. If you close
your
browser window without
first
clicking Logout, there will
be a two
minute delay before you
can re-
access iBoot.
iBoot uses an inactivity timer for security. When there is no activity for 2
minutes, the user is logged out and the password will need to be entered
again for access. This is to prevent accidental lockout by leaving the user
logged in.