Daxten IBOOT - Manual Download Page 23

Ver 2.0 and up 

iBoot 

Page 23  

TECHNICAL SUPPORT, RETURNS and WARRANTY 

 
Dataprobe Technical Support is available 8:30AM to 5:30PM ET to assist you in the installation 
and operation of this product.  To obtain Technical Support call our Tech Support Hotline at 201- 
967-8788, or Email us at [email protected].  Please have the following information available 
when you call: 
 

 

Model of Product 

 

 

 

Serial, Lot and/or Version Numbers 

 

Data of Purchase 

 

 

 

Name of Seller (if other than Dataprobe) 

 
If you purchased this product through an 

Authorized Dataprobe Reseller,

 you should contact 

them first, as they may have information about the application that can more quickly answer your 
questions. 
 

WARRANTY 

 
Seller warrants this product, if used in accordance with all applicable instructions, to be free from 
original defects in material and workmanship for a period of One Year from the date of initial 
purchase.  If the product should prove defective within that period, Seller will repair or replace 
the product, at its sole discretion. 
 
Service under this Warranty is obtained by shipping the product (with all charges prepaid) to the 
address below. Seller will pay return shipping charges.  Call Dataprobe Technical Service at 
(201) 967-8788 to receive a Return Materials Authorization (RMA) Number prior to sending any 
equipment back for repair.  Include all cables, power supplies and proof of purchase with 
shipment. 
 

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING 
FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT.  SELLER MAKES NO EXPRESS 
WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN.  
EXCEPT TO THE EXTENT PROHIBITED BY LAW, ALL IMPLIED WARRANTIES, 
INCLUDING ALL WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR ANY 
PURPOSE ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS 
WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL 
DAMAGES. 

 
Some states do not allow limitations on how long an implied warranty lasts, and some states do 
not allow the exclusion or limitation of incidental or consequential damages, so the above 
limitations or exclusions may not apply to you.  This warranty gives you specific legal rights, and 
you may have other rights which vary from jurisdictions to jurisdiction. 
 

WARNING:

 The individual user should take care to determine prior to use whether this device is 

suitable, adequate or safe for the use intended.  Since individual applications are subject to 
great variation, the manufacturer makes no representation or warranty as to the suitability of 
fitness for any specific application. 
 
 

 

Dataprobe Inc. 

 

 

11 Park Place 

 

 

Paramus, NJ  0765

Summary of Contents for IBOOT -

























Reviews: