![background image](http://html1.mh-extra.com/html/davis/and-vantage-pro/and-vantage-pro_user-manual-and-setup-manual_3860147012.webp)
Vantage Pro Console Installation
Page 12
Vantage Pro Manual
C
A B L E D
V
A N T A G E
P
R O
C
O N S O L E
I
N S T A L L A T I O N
The Cabled Vantage Pro is powered by 5-volt DC (direct current) with battery
backup. Power may be supplied by an AC adapter, or with Davis’ optional 12
to 5-Volt Car/Boat/RV power adapter. (See “Optional Accessories” on
page 10.)
• WARNING:
The Vantage Pro system uses power differenly from the way older Davis stations did. Use only
a Davis Vantage Pro 9-volt power converter. Using an older Davis adapter will damage your Vantage Pro!
Powering your Vantage Pro
Because the Cabled Vantage Pro console supplies power to the sensor array
through the connecting cable, you must use the AC power adapter or the
optional Car/Boat/RV adapter to supply primary power. The three C-cell bat-
teries provide backup power and will operate the station for four to six weeks
only.
1. Insert the power adapter plug into the jack located on the right side of the console,
then plug the other end of the adapter into an appropriate power outlet.
The Vantage Pro should run through a brief self-test procedure. All the dis-
play segments on the LCD appear and the console will beep twice.
2. Insert the C-cell battery backup.
Remove the battery cover located on the back of the console. Insert 3 C bat-
teries into the battery channel, negative (or flat) terminal first. Push gently
on the last battery to seat all three in the channel and complete the circuit.
Summary of Contents for and Vantage Pro
