background image

Current Weather Mode

Vantage Pro Console Manual 

Page 29

Barometric pressure may be displayed in inches (in), millimeters (mm), milli-
bars (mb) or hectoPascals (hPa). See “Barometric Pressure” on page 50.

• Pressure Trend Arrow

The Barometric Trend Arrow depicts the current barometric trend, measured 
over the last 3 hours. The trend arrow is always displayed (unless less than 
three hours of pressure data is available), whether the barometric pressure is 
selected or not. 

UV (Ultraviolet Radiation)

• Current UV

Press the UV / SUN key to display the current UV read-
ing as an index. Press again to see MEDS.
UV may be displayed as an index (1-7) or in MEDS.  See 
“UV (Ultra Violet) Radiation” on page 51. 

Heat Indices

• Heat Index

Press and release the 2ND key, then press the 
TEMP / HEAT key to display the Heat Index. See 
“Apparent Temperature Measures” on page 47.

• THSW Index

If you have installed the optional Solar Radiation 
Sensor, repeat the sequence one more time to display the THSW (Temperature - 
Humidity - Sun - Wind Index). See “Apparent Temperature Measures” on 
page 47.
Both heat indices appear in the same place on the screen and may be displayed, 
like temperature and wind chill, as either degrees Fahrenheit (ºF) or Centigrade 
(ºC).

Rain “ Year ”, Rain “Month”, and Rain Rate

Summary of Contents for and Vantage Pro





























































Reviews: