![background image](http://html1.mh-extra.com/html/davis/and-vantage-pro/and-vantage-pro_user-manual-and-setup-manual_3860147036.webp)
Chapter 3
Page 36
Vantage Pro Console Manual
2. Select any weather variable available.
Use the arrow keys to select variables currently displayed, or use the key-
press sequences. (See “Activating Weather Variables” on page 26 for review.)
3. Press 2nd and DONE/SET.
The rightmost digit in the variable field will begin blinking. Use the up and
down arrow keys to change the digit. Use the left and right arrow keys to
move between digits.
4. When you’ve keyed in the threshold value you want, press the DONE/SET key again.
You’re still in the alarm mode, so choose any other variable for which you’d
like to set a threshold.
5. If you’re finished setting alarms, press DONE/SET again and the console will return to
current weather mode.
Setting the Time Alarm
1. To set the time alarm, enter the alarm mode as described above.
2. Press Time, then 2nd and DONE/SET.
The time field will begin blinking. Set the time and date for the alarm.
Clearing Alarms
Clearing an alarm is easy.
• If an alarm is sounding, press 2ND and then hold the HI/LOW / CLEAR key until the
ringing stops (~ four seconds).
• To clear a set alarm,
1. enter alarm mode as described above.
2. Select the variable alarm you wish to clear, either by pressing the key, e.g. UV,
or using the arrow keys.
You must use the keypress sequence to activate the variable if the vari-
able is not displayed.
• Press and hold clear.
The threshold value will blink. When the value changes to all dashes,
you have cleared the value.
Summary of Contents for and Vantage Pro
