background image

TEMPERATURE

Vantage Pro Manual 

Page 43

 

Outside temperature 
sensor reading seems 
too high

Check calibration number and adjust if
necessary.

ISS may need to be relocated. See ISS (or
other transmitter) manual

Inside temperature 
sensor reading seems 
too high

Move the Vantage Pro console (or other
temp sensor if you have installed addi-
tional wireless temperature sensors) out of
direct sunlight.

Make sure that the console or sensor is not
in contact with an exterior wall that heats
up in sunlight or when outside tempera-
ture rises.

Make sure the console or sensor is not near
a heater or other internal heat source
(lamps, appliances, etc.).

Check calibration number and adjust if
necessary.

Outside temperature 
seems too low

Check calibration number and adjust if
necessary.

Sprinklers may be hitting the ISS radiaion
shield. Relocate. See ISS manual.

Inside temperature 
sensor reading seems 
too low

Make sure the the console or other tem-
perature sensor is not in contact with an
exterior wall that cools down when out-
side temperature drops.

Make sure the console or other tempera-
ture sensor is not near an air conditoning
vent.

Check calibration number and adjust if
necessary.

Problem

Solution

PG.

Summary of Contents for and Vantage Pro





























































Reviews: