12
Two pushes of the Pump 1B button cycles the pump as follows:
Push 1 (Pump On)
LCD displays “PUMP ON”, button LED green.
Push 2 (Pump Off)
LCD displays “PUMP OFF”, button LED off.
Notes:
1. If Pump 1B is left on, this pump will automatically switch off after 25 minutes.
2. If the heater element is on, running the pump may cause the heater to load shed and switch off.
If this occurs the heater will come back on approximately 5 seconds after the pump is deselected.
3.6.1 Pump Speed Mode
In the adjustable speed mode the UP and DOWN buttons are used to set the variable pump speed.
“PUMP SPEED” will be shown along with a bar graph showing the current speed setting. While viewing
this display you may press the UP and DOWN button to adjust the speed as required. Hold down
either button for automatic key press repeat. This setting is saved and will be automatically restored
next time you select adjustable speed mode. The minimum pump speed allowed is 20%. You may not
hear the pump running at this speed.
3.7 24Hr Circulation Pump On/Off
If a circulation pump has been fitted the spa manufacturer may have assigned an on/off button on the touch
pad to turn the circulation pump on and off. If a button has been assigned follow the instructions below.
-To switch circulation pump off push the assigned button.
-To switch the circulation pump on push the assigned button.
Note:
If the circulation pump is switched off it will be reactivated after 25 minutes of touch pad inactivity.
Summary of Contents for Spa Power SP800
Page 17: ...17 7 Menu Structure...
Page 43: ......