16
6.2.1 Adjusting The Light Effect Mode Speed
When a light effect mode has been selected (“SMOOTH CHANGE” to “STEP CHANGE” see above)
the speed at which the light cycles through the available colours may be manually adjusted. On the
first press of UP/DOWN the LCD will display “EFFECT SPEED” along with a bar graph showing the
current setting. While viewing this display you may press the UP and DOWN buttons to adjust the cy-
cle speed as required. Hold down either button for automatic key press repeat. At the maximum setting
of 100% the speed is approximately 40 times faster than the minimum setting of 2% and approximately
6 times faster than the default setting of 50%. The setting for each light effect is saved individually and
will be restored next time you select the given light effect mode.
Notes:
1. The UP and DOWN buttons are shared with Light Level, Light Mode, SPVSB speed and the menu
system. When not within the menu system the actual use of the UP and DOWN buttons depends
on which of the three function buttons was pressed last - Light Level, Light Mode or Air.
2. Pressing either Light Level or Light Mode buttons while the light is on will only cycle through the
available options when the LCD is displaying the current selection. This allows you to set the func-
tion of the UP and DOWN buttons and to view the current Light Level or Light Mode setting without
changing them.
3. Pressing Light Mode button when light is off will turn on the light using Light Level High.
4. By default the touch pad panel backlight will mirror the pool setting, but this feature may be
disabled. See section 7.8.7 on page 26
Summary of Contents for Spa Power SP800
Page 17: ...17 7 Menu Structure...
Page 43: ......
