11
3.5 Pump 1A & 1B (Single speed pumps, 24hr circulation pump fitted)
Two pushes of the Pump 1A button cycles the pump as follows:
Push 1 (Pump On)
LCD displays “PUMP ON”, button LED green.
Push 2 (Pump Off)
LCD displays “PUMP OFF”, button LED off.
Two pushes of the Pump 1B button cycles the pump as follows:
Push 1 (Pump On)
LCD displays “PUMP ON”, button LED green.
Push 2 (Pump Off)
LCD displays “PUMP OFF”, button LED off.
Notes:
1. If Pump 1A or Pump 1B are left on, these pumps will automatically switch off after 25 minutes.
2. If the heater element is on, running these pumps may cause the heater to load shed and switch off.
If this occurs the heater will come back on approximately 5 seconds after the pump is deselected.
3.6 Pump 1A & 1B
(Variable speed pump, single speed pump, no circulation pump fitted)
Five pushes of the Pump 1A button cycles the pump as follows:
Push 1 (Pump Auto)
LCD displays “PUMP AUTO”, button LED green.
Push 2 (Pump On)
LCD displays “PUMP ON”, button LED green.
Push 3 (Pump Ramping)
LCD displays “PUMP RAMPING”, button LED green.
Push 4 (Pump Speed)
LCD displays “PUMP SPEED”, button LED green.
Push 5 (Pump Off)
LCD displays “PUMP OFF”, button LED off.
Notes:
1. If Pump 1A is left in “PUMP ON” or “PUMP OFF” modes, this pump will automatically revert to
“AUTO” mode after 90 minutes.
2. If the heater element is on, running these pumps may cause the heater to load shed and switch off.
If this occurs the heater will come back on approximately 5 seconds after the pump is deselected.
3. In “Pump AUTO” or “Pump ON” the variable pump speed will be 20%. You may not hear the pump
running at this speed.
4. Depending on the configuration of your controller, the pump speed may be limited to 90% when
both the variable speed pump and variable speed blower are running.
Summary of Contents for Spa Power SP800
Page 17: ...17 7 Menu Structure...
Page 43: ......
