background image

Specifications

EC manufacturer's declaration of conformity

15

Safety Requirements

daum electronic gmbh hereby declares that this product complies with the

following provisions regarding electromagnetic compatibility and electrical safety:

- EN 957-5 Additional specific safety requirements and test methods
- EC directive 93/42EEC of the council of June 14, 1993 about medical products
- 89 / 336 / EEC of May 3, 1989 including subsequent changes (Recommendation

  92 / 31 / EEC of April 28, 1992 and recommendation 93 /68 / EEC of July 22,

 1993)
- 73 / 23 / EEC of February 19, 1973 including subsequent changes

  (Recommendation 93 / 68 / EEC of August 30, 1993)
-  02 / 96 / EG of January  27, 2003 about Recycling of old electic and electronic

devices

-  03  /  108  /  EG  of  December  8,  2003  of  changes  (Recommendation)

   2002 / 96/ EG 

about Recycling of old electic and electronic 

- EN 60601-1-2 (EMC, Generic Emission Standard, Part 1: Residential commercial

  and light industry)

Technical Safety Recommendations:

Compare the supply voltage indicated on the nameplate located on the housing

with your local supply voltage prior to plugging the power cord to the power

supply. Please contact you dealer if the values are not the same.

The device is completely disconnected from the power supply by pulling out the

power cord, therefore it should always be plugged into an easily accessible

socket.

Braking system:

                 Computer-controlled, full electronic eddy current

                                                   brake (operating in the speed ranges shown

                                                   in the diagram on page 16)

Load range:

                 20 to 1000 Watt

Speed range:

                 0 to 200 RPM

Load precision:

                 Conform to DIN VDE 0750-238 (German

                                                    Electrotechnology Federation)

Loading levels:

                 In 1-Watt increments, manually adjustable

Drive:

                 Two-stage, maintenance-free V-ribbed belt drive.

Saddle height adjustment:           fast setting in 18 levels

Handlebars setting:                  approx. 360° continuous

Displays:                                   Colour screen

                                                    256 Colours

                                                    320 x 240 / 76800 Pixels

Pulse rate measurement:

Measuring range 40 to 200 beats per minute

                                                    Telemetric using the Cardio sensor chest strap

                                                    (available as an optional accessory)

Alarm signals:

Acoustic and optical

Weight:                                     approx. 45 kg

Dimensions:

                 L 97 cm, W 54 cm, and H 125 cm

Power supply:

230 V alternating current, 50 Hz, 50 VA

protective signs:

                 CE - 0297

Safety class:

                 1

GB

Summary of Contents for ergo_bike medical8

























Reviews: