![background image](http://html1.mh-extra.com/html/daum-electronic/ergo-bike-premium-8i-series/ergo-bike-premium-8i-series_user-manual_514132029.webp)
29
Assembly and Installation Guide
1
1
2
2
floor level adjustment
Screw for
1
2
Installation step 1
Attach the feet (with casters) to the front of the drive unit
(M8x50 cap screw, L37 spacer bushing).
Attach the feet (with floor level adjustment) to the rear of the drive unit
(M8x50 cap screw, L37 spacer bushing).
Installation step 2
Mount and tighten the handlebars with the clamp to the handlebars column
(M6x25 cap screw).
Screw and tighten the star knob (with the spacer bushing) through the handlebars
clamp. The handlebars are now secured in place.
Installation step 3
Then connect the cable connectors to the dashboard. An enlarged detailed view
of the various connectors is shown in figure 2.
Connect the black connector
2
(with 4 pins) to the black female connector
2
to
the left underneath the battery. Connect the grey connector
3
to the grey female
connector
3
underneath the battery and the control cable
4
in the RS422-interface
socket
4
to the left, close to the battery.
GB
All manuals and user guides at all-guides.com