![background image](http://html1.mh-extra.com/html/daum-electronic/ergo-bike-premium-8i-series/ergo-bike-premium-8i-series_user-manual_514132027.webp)
Specifications
27
Assembly and Installation Guide
Assembly Notes
Please make sure that no parts are missing (see package content list) and
whether any deterioration occurred in transit. Please contact the company daum
electronic gmbh in case of trouble.
Please assemble the device as shown in the picture sequence in the following
assembly and installation guide.
Please keep in mind that a risk of injury exists with any use of a tool. You should
therefore work carefully and cautiously when assembling the device, and also
do not leave any tool lying around.
Please dispose of all packaging material in a safe way. Keep all foil and plastic
bags away from children -
suffocation risk
.
If in doubt, ask another person to help you with the installation.
You will find all needed tools and hardware in the small parts bag. Start by
loosely assembling the parts together, without tightening the screws, and check
whether they fit correctly. Then firmly tighten all the parts together.
The ergo_bike should be installed on a level ground. The manufacturer is
not liable for any damage done to the floor. Particularly with soft floor
surfaces (e.g. PVC, etc) where pressure spots will form after a short period
of time.
We therefore recommend installing and using the device on a protective
base. Appropriate protective bases can be ordered from daum electronic
gmbh.
It is not intended for use in rooms with damp conditions. This could cause rust
to build up on the ergo_bike, which would damage device parts and impair both
the operating functions and the safety features.
The ergo_bike functions with a mains voltage of 230 Volt, 50 Hz and has a
power consumption of 50 Watt. The power supply you wish to use must satisfy
these requirements!
Braking system:
Computer-controlled, full electronic eddy current brake
(operating in the speed ranges shown in the diagram
on page 33)
Load range:
20 to 1000 Watt
Speed range:
0 to 200 RPM
Load precision:
Conform to DIN EN 957 1/-5 Class SA/HA
Loading levels:
In 1-Watt increments, manually adjustable
Drive:
Two-stage, maintenance-free V-ribbed belt drive
in a spring supported drive unit.
Flywheel:
Precision machined
Saddle height adjustment:
fast setting in 18 levels for body sizes of 120 to
190 cm
Handlebars setting:
approx. +/- 180° continuous
Displays:
Colour screen
256 Colours
320 x 240 / 76800 Pixels
Pulse rate measurement:
On the ear, measuring range 40 to 200 pulses/min.
Telemetric using the Cardio sensor chest strap
(available as an optional accessory), and over
the pulse sensors integrated in the handlebars
Alarm signals:
Acoustic and optical
Weight
: approx. 45 kg
Dimensions:
L 85 -125 cm, W 53 cm, and H 97 - 125 cm
Power supply:
230 V alternating current, 50 Hz, 50 W
Safety class:
1
Safety Requirements
Conformity to the Technical Plant and Equipment Act
daum electronic gmbh hereby declares that this product complies with the
following provisions regarding electromagnetic compatibility and electrical safety:
- 89 / 336 / EEC of May 3, 1989 including subsequent changes (Recommendation
92 / 31 / EEC of April 28, 1992 and recommendation 93 /68 / EEC of July 22,
1993)
- 73 / 23 / EEC of February 19, 1973 including subsequent changes
(Recommendation 93 / 68 / EEC of August 30, 1993)
- 02 / 96 / EG of January 27, 2003 about Recycling of old electic and electronic
devices
- 03 / 108 / EG of December 8, 2003 of changes (Recommendation)
2002 / 96/ EG
about Recycling of old electic and electronic
- EN 60601-1-2 (EMC, Generic Emission Standard, Part 1: Residential, commercial,
and light industry)
Technical Safety Recommendations:
Compare the supply voltage indicated on the nameplate located on the housing
with your local supply voltage prior to plugging the power cord to the power
supply. Please contact you dealer if the values are not the same.
The device is completely disconnected from the power supply by pulling out the
power cord, therefore it should always be plugged into an easily accessible
socket.
Area of Application:
The device is suitable for professional and/or commercial utilisation
(complies with DIN EN 957 1/-5 Class SA/HA).
It does not meet the requirements for medical diagnostic applications
(clinical use).
The maximum allowed weight capacity is 150 kg!
GB
All manuals and user guides at all-guides.com