3: Operation
RT7000-MSOP
3-11
(26) TEST REAR PANEL I/O
For testing the rear panel accessory connectors. It is for
factory use only.
(27) ENC PASSWORD
To access the Encryption menu for configuration, if the
7000ENCR option is installed. For detailed informa-
tion, refer to the 7000-series high-level encryption
operator manual (7000ENCR-MSOP).
(28) PTT TIMER
Provides the ability to change the internal PTT time-
out. It is set for any length of time from one second to
one hour. Entering
0
sets it to
OFF
(no time-out). The
default is 300 seconds.
(29) PRINTER
Automatically prints complete channel information for
the RT7000 if an external printer is connected.
(30) CLONE RADIO
Allows cloning of another transceiver by downloading
all frequency and channel settings.
(31) GLOBAL POSITION SYSTEM
For configuring an external GPS device.
(32) CW HOLD TIME
For setting the continuous wave hold time. Enter the
number in msec.
(33) SPLIT SITE
For configuring two radios: receive only (master) and
transmit only (slave). The receive radio controls the
transmitter.
•
Polling is set to
1
(
OFF
) or
2
(
ON
).
•
Alarm timer sets the interval in minutes between
system polling from the receiver to the transmitter.
•
FP alarm activates the internal alarm when loss of
communication occurs. Set to
1
(
OFF
) or
2
(
ON
).
•
External alarm activates the external alarm when
loss of communication occurs. Set to
1
(
OFF
) or
2
(
ON
).
(34) CLARIFIER
For toggling the clarifier between
ON
and
OFF
.
