1: Introduction
RT7000-MSOP
1-5
7000RI
Internal modem allows remote contact from the TW7201I
ISDN controller.
7000RS
Modem interface board configures a second serial port
(RS422/485) to provide data protocol for external control of
the radio through a computer. This is in addition to the
standard RS232 interface.
7000TC
Digital selective calling system plus automatic path
evaluation. Combines all functions of Transcall, Selcall, and
TransAdapt.
7000VEM
DSP-based voice enhancement provides superior voice
recognition and signal-quality improvement in noisy
environments.
7000WB1
Wideband data filter providing 300 to 3300 Hz with tailored
group delay characteristics for data operation.
RT7000AIRSELCALL
Operating with N-1304A (or equivalent) SELCAL devices
and Datron power amplifiers, it adds a secondary control
line to the radio and allows use of the ICAO-mandated
ground-to-air SELCAL 3-tone system.
Conventions
Bold type is used to denote all items that appear in the display area and for any
button, knob or connector used on the front or rear panel. For example:
•
Press
C
and
041
and
E
.
Display:
CH FREQ
041 13.330,000 MHz
Rx
•
Press
ALPHA
and
17
.
•
Press
STATUS
.
Referenced Manuals
•
RT7000-MS Transceiver technical manual
•
7000ALE-MSOP ALE Radio Control operator manual
•
7000ENCR-MSOP High-Level Encryption operator manual
•
RT7201I-MS ISDN Remote Control operator/technical manual
•
RT7201F-MS FSK Remote Control operator/technical manual
•
RC2-MSOP Radio Control 2 Software operator manual
