Datcon DT9502, Operating Instructions Manual, Page: 81 / 92

DT9502
20171205-V3
81
•


: It switches ON, when
(measured temperature < low limit) OR
(measured temperature > high limit)

The output switches ON, when the displayed temperature is
lower than the numerical value defined as the

parameter OR higher than numerical value defined as
the

.
Example for the application:
It indicates that the measured temperature out of the
desired limits.
Displaying the limit
values (Switching the displaying on: from the 04.LD menu item.)
•
Both outputs are OFF:


•
Output 1 is ON, output 2 is OFF:


•
Output 1 is OFF, output 2 is ON:


•
Both outputs are ON:


If the Alarm Mode is ON, and the given output is in alarm
status, the above displays appear blinking. The blinking
stops only when the acknowledgement is done manually
(Upon pressing the
ENTER button.)