Datavideo SE-3000, Visual Quickstart Manual

Page: 46 / 64

41
3.9.1.5 Soft Balance Control
This control adjusts the ‘inside’ and
‘outside’ edge softness of the Wipe Border
you have selected.
If the Soft Balance is set to ‘0.0’ then both
the Inside & Outside edges have the same
softness, as set by the ‘Soft Control’.
If the Soft Balance is set to a positive
number, then the inside edge is made
softer.
If the Soft Balance is set to a negative
number, then the outside edge is made
softer.
3.9.2 Wipe Border Menu
The Wipe Border Menu allows control of
the Wipe Border Matte
The Color Wheel allow selection of the
Wipe Border Matte Hue & Saturation
The cursor shows the currently selected
color
a new color can be selected by touching
the appropriate color
The vertical bar on the right hand side
allow the Luma (Brightness) of the Matte to
be controlled
BACK TO TABLE OF CONTENTS