9
Chapter 2
Connections to the KMU-200
In this section, you will be provided with general overviews of the rear panel as well as the
control panel.
2.1 Rear Panel
This section provides brief descriptions of various connection ports on the rear panel.
Power
DC IN
DC in socket connects the supplied 12V PSU.
Pin 1 = GND ( - )
Pin 2 = NC
Pin 3 = NC
Pin 4 = VCC ( + )
Power Switch
Turns ON/OFF the device
Grounding Terminal
When connecting this unit to any other
component, make sure that it is properly
grounded by connecting this terminal to an
appropriate point. When connecting, use the
socket and be sure to use wire with a cross-
sectional area of at least 1.0 mm
2
.
Video
4K HDMI IN
Video IN supporting up to 2160p50/59.94/60.
The green LED on the left indicates presence of
the 4K input.
