21
Connecting to a NON-DHCP Network (Static IP)
Upon connection to a non-DHCP network, the NVS-31 MARK II will not be assigned of any IP
addresses. As such it is recommended that you manually assign a fixed IP address to the
device or use the default IP address (
192.168.1.60
).
Default Fixed IP
Default Fixed IP is primarily used in point-to-point connection, such as connecting the PC to
the NVS-31 MARK II directly. In a non-DHCP environment, the NVS-31 MARK II works in fixed
IP mode only. To configure the NVS-31 MARK II to the
default IP
, please follow the steps
outlined below:
1.
Connect the NVS-31 MARK II’s stream port to the network via an Ethernet
cable.
2.
Turn on the KMU-200’s power and the NVS-31 MARK II will also be turned ON in the
DHCP mode by default.
3.
Search for the NVS-31 MARK II device according to the method as detailed in the
previous DHCP section. Once found, log into the user interface on the web browser.
4.
Enter the system page by clicking
the “System” tab on the home of
the user interface.
5.
In the “Network Setting”, disable
the DHCP mode.
6.
You will then be allowed to manually enter the static IP address once the DHCP mode is
disabled. The static IP is 192.168.1.60 by default. The subnet mask and default gateway
are 255.255.255.0 and 192.168.1.254 respectively.
